Call toll Free 1-800-633-1033

Probes

Sensatronics offers a wide selection of probes for just about any need you may have. use the links below to quickly navigate to specific probe types.


Temperature Probes

Temperature Probe for Senturion Monitor
enlarge image
Constructed with an RJ12 and Cat5e cable, this probe is the only temperature probe for use with the Senturion.
Temp Range -40°F to 140°F (-40°C to 60°C)



Standard Temperature Probe
enlarge image
Low profile, thermistor based probe best suited for IT applications and areas with a low risk of physical damage.
Temp Range -40°F to 140°F (-40°C to 60°C)
Use with Model E, F, EM1, U



Heavy Duty Temperature Probe
enlarge image
Stainless steel tip and rugged cable construction make the Heavy Duty probe ideal for high RF and other harsh environments such as refrigerators and outdoors.
Temp Range -40°F to 140°F (-40°C to 60°C)
Use with Model E, F, EM1, U



Flanged Temperature Probe
enlarge image
7 inch stainless steel probe tip with flanged end for installation into refrigeration units or other devices.
Temp Range -40°F to 140°F (-40°C to 60°C)
Use with Model E, F, EM1, U


Piercing Temperature Probe
enlarge image
4 inch stainless steel food grade insertion probe with easy to grip handle. Primarily used for food piercing but can be adapted to any application.
Temp Range -40°F to 140°F (-40°C to 60°C)
Use with Model E, F, EM1, U



Cryogenic Temperature Probe
enlarge image
Rated for extreme cold applications with a stainless steel tip and special cable construction. Included connector allows for extension up to 1000 feet.
Temp Range -139°F to 80°F (-95°C to 27°C)
Use with Model U

Temperature/Humidity Probes

Temperature and Humidity Probe for EM1 Monitor
enlarge image
RHT Probe
Combination probe for measuring temperature and relative humidity of a room or space. Highly accurate and NIST traceability is available.
Humidity Accuracy 3% RH from 5% to 95%
Use with Model EM1 only


Temperature and Humidity Probe for EM1 Monitor
enlarge image
RHT-S Probe
Low profile temperature/humidity probe for use with the Senturion Environmental Monitor. Due to its small size, this probe is ideal for monitoirng individual server racks.
Humidity Accuracy 2% RH from 5% to 90% Relative Humidity


Wetness Probes

Wetness Probe for Senturion Monitor
enlarge image
10' water sensor with a quick release connector to a Cat5e cable with an RJ12 connector. The sensor can be extended as needed by adding a wetness probe extension .
Sensitive to a single droplet of water on the sensor.




Wetness Probe for EM1 Monitor
enlarge image
10' water sensor with connector to a heavy duty cable. The sensor can be extended as needed by adding a
Sensitive to a single droplet of water on the sensor.
Use with Model EM1 only




Power Probe

Power Monitoring Probe
enlarge image
Designed to detect the presence of power on AC outlets. The probe provides actual voltage information for monitoring of brown outs or an "unclean" power source. (Available in US and Canada only)
5% accuracy on voltage measurements at 70°F



Security Probes

Smoke Detector for Senturion Monitor
enlarge image
Standard DC based smoke detector from GE which is highly accurate. This detector is a nice addition to any monitoring solution.



Motion Detector for Senturion Monitor
enlarge image
Passive IR motion sensor which reports the percentage of the test interval during which motion was detected.



Door Sensor for Senturion Monitor
enlarge image
Proximity sensor which detects the state of a door and returns a percentage value indicating how long the portal was open during the test interval.
Allows for ¾ inch gap



Door Sensor
enlarge image
Proximity sensor for use on doors, windows or other portals where users wish to monitor the open/closed state.
Allows for ¾ gap in the opening
Use with Model EM1, U



IP Cameras

IP Camera
enlarge image
This stationary IP addressable camera is accessible independently or through the Senturion interface. Natively, this unit is able to stream video, capture images and send email alerts.

$107.99


IP Camera
enlarge image
Wi-Fi enabled IEEE 802.11 b/g IP camera accessible through the Senturion interface. Users can utilize the camera's features to setup alerts and capture video and still images.

$149.99


IP Camera
enlarge image
The Pan/Tilt camera can function as a standalone unit, or users can access this through the Senturion Rack Mount Environmental Monitor. In addition to providing high quality full color images, users can change the view through the web interface to scan an area or alter the view.

$194.99


IP Camera
enlarge image
This camera functions just as the wired version, but provides the ability to access IEEE 802.11 b/g Wi-Fi networks. Simple to setup and use, the streaming video is accessible through the Senturion interface.

$254.99


IP Camera
enlarge image
This advanced camera utilizes infrared LED's to self illuminate the area providing high quality digital images in either light or complete darkness. Easily interfaces with the Senturion Rack Mount Monitor to round out your environmental monitoring solution.

$399.00


Dry Contact Probes

Dry Contact for Senturion Monitor
enlarge image
Monitor any device with a dry contact output. This sensor will return a yes/no value to allow for visibility into device usage.



Dry Contact for Senturion Monitor
enlarge image
Use this sensor to monitor dry contact outputs on devices such as AC units, UPS's, or other switches.
Use with Model EM1, U



Velaro Live Help

Name *
Company *
Phone *
Email *
More Info